Serve Real Laboratory Co
Build your lab easier
Add to Cart
Hot Seal Strength Tester Packaging Test Equipment ASTM F2029
Model: BZ-HST-03A
Standards: QB/T 2358, ASTM F2029, YBB 00122003
The heat seal tester is applicable to the accurate measurement of the heat seal temperature, heat seal time, heat seal pressure and other parameters of the test material. It is a common packaging material testing instrument.
Features
Microcomputer control, large screen LCD display
Higher temperature control accuracy
Down-mounted dual-cylinder synchronous circuit ensures balanced pressure
Aluminum potting thermal head ensures the heating uniformity of the thermal cover
The upper and lower thermal heads have independent temperature control, and the super-long thermal cover design can meet the needs of different customers
Dual mode of manual and foot switch, humanized structure design
Scald-proof design and leakage protection design make the operation safer
Micro printer, which is convenient for users to print test results
Test principle
Place the sample to be sealed between the upper and lower thermal heads, then seal the sample under the preset temperature, pressure and time. Find the best sealing parameters after multi tests.
| Thin film material | Smooth plane |
| Jelly cup lid | Put the jelly cup into the opening of the lower head. The opening of the lower head matches the outer diameter of the jelly cup. The flanging of the cup mouth falls on the edge of the hole. The upper head is made into a circle. Press down to complete the heat seal of the jelly cup (note: customized accessories are required) |
| Plastic hose | Place the end of the plastic hose between the upper and lower heads, and heat seal the end to make the plastic hose a packaging container |
Specifications
| Heat seal temperature | Room temperature ~ 300℃ |
| control accuracy | ±0.2℃ |
| Heat sealing time | 0.1 ~ 999.9s |
| Heat seal pressure | 0.05 MPa ~ 0.7 MPa |
| Hot cover | 330 mm × 10 mm(can be custom made) |
| Heating form | Dual heating (single heating optional) |
| Air supply pressure | 0.05 MPa ~ 0.7MPa(air source self contained) |
| air connection | Ф6 mm PU tube |
| Power Supply | AC 220 V 50 Hz |
| Overall dimension | 536 mm (L) × 335 mm (B) × 413 mm (H) |
| Net weight | 40 kg |
Configurations
Standard configuration: host, foot switch, micro printer
Option: professional software, communication cable
Remarks: The air source interface of this machine is Φ 6mm polyurethane pipe; The gas source is prepared by the user.