Serve Real Laboratory Co
Build your lab easier
Add to Cart
ASTM D4595, BS EN ISO 10319, EN ISO 12236(GB/T14800), ASTM D4833, ASTM D5034, ASTM D5035, ASTM D-4533, BS6906.1,GB/T16989
1. Smart touch interface, 5.7-inch super large screen, click at will.
2. The load cell adopts a 0.5-level high-precision load cell.
3. Adopt the international high-end all-aluminum alloy shape design, and the surface is treated with sandblasting and anodizing process.
4. The Chinese and English dual interface can be switched arbitrarily, and the test curve, graph, and data can be displayed dynamically.
5. Adopt advanced digital signal processing (DSP) technology, Philips 32-bit full digital control and 2500 f/s high-speed data acquisition.
6. Taiwan precision pre-loaded ball screw, no backlash, high positioning accuracy.
7. Non-clutch drive device, capable of running at full speed under maximum force.
8. Fully comply with "Mechanical Equipment 2006/42/EC", "Low Voltage 2006/95/EC", "EMC Directive 20044/108/EC" and GOST-R;
| Model | GT-010 | GT010D |
| Test method & Control | CRE principle, microcomputer control, LCD display, support for online | CRE principle, microcomputer & computer dual control, dual-screen display |
| Test load | 5KN;10KN; 30KN; 50KN | |
| Sampling frequency | 2500hz | 2500hz |
| Measuring force range | 1%～100% of full scale | 1%～100% of full scale |
| Force measurement accuracy | ≤±0.02%F.S | ≤±0.02%F.S |
| Stretching speed | 0.05-500mm/min | 0.05-500mm/min |
| Effective stroke of beam | 800mm Resolution: 0.01mm | 800mm Resolution: 0.01mm |
| Holder: wide strip tensile test | width 200mm; tear test: width 100mm | width 200mm; tear test: width 100mm |
| CBR burst test | φ50×100mm | φ50×100mm |
| Power supply: | AC220V±10% 50Hz 1.5KW | AC220V±10% 50Hz 1.5KW |
| Dimensions | 860×600×1800mm | 860×600×1800mm |
| Weight | 300kg | 320kg |
| Tests type | Suggested load | Test parameters | Standards |
| 1.Wide-width tensile & elongation | 10000N
| 1. Clamper width: 220mm 2. Clamp distance: 100mm | BS EN ISO 10319 |
| 2.Trapezoidal Tear test | ASTM D-4533 | ||
| 3.CBR puncture test | 50000N | 1. Mandrel Dia.: 50mm 2. Press rate: 60mm/min | EN ISO 12236(GB/T14800) |
| 4.Puncturing test | 10000N | 1. Mandrel diameter: 8mm Inner diameter of ring fixture: 44.5mm Sample diameter: 120mm 2. Pressing speed: 30mm/min | GB/T17643, ASTM D4833 |
| 5. Breaking force and elongation strength test | 10000N 50000N | 1. Width of holder: 25mm Sample width: 100mm 2. Stretching speed: 100mm/min 3. Clamping distance: 75mm | ASTM D5034, D5035 |
